Horizontal Lathe High Precision Le Boima Boima ba Enjene Lathe
* Tšobotsi
- Precision ground and supersonic frequency hardened bed way e entsoe ka sebopeho sa marako a mabeli, e fanang ka ho tiea ho hoholo.
- Sisteme ea spindle e phahame ka ho tiea le ho nepahala.
- Moralo oa koloi e kholo e ntlafalitsoe mme likere tse hloohong li maemong a nepahetseng.
- lerata la mochini le tlase.
- Ha ho hlokahale ho fetola likoloi.
- Mochini o ka fetola mefuta e ka bang 200 ea metric, boleng ba boleng, module le likhoele tsa DP.
- Sesebelisoa sa ho emisa ka boiketsetso se sebelisoa ho lemoha setopong sa othomathike bakeng sa mochini oa sebaka se itseng sa bolelele ba mosebetsi, se bolokehileng.
- Sesebelisoa sa braking sa pedal se fanang ka ho emisa kapele le ka tsela e sebetsang ha se ntse se sebetsa.
| Mohlala | L5841x1000 | L5841x1500 |
| Qhobetsa hodima bethe | Φ410mm (16") | Φ410mm (16") |
| Tsamaea holim'a cross slide | Φ224mm(8 13/16") | Φ224mm(8 13/16") |
| Swing in gap(D×W) | 640mmx218mm | 640mmx218mm |
| Bophahamo ba setsi | 205mm(8 5/64") | 205mm(8 5/64") |
| Sebaka pakeng tsa litsi | 1015 limilimithara | 1515 limilimithara |
| Bophara ba bethe | 300mm(11 3/4") | 300mm(11 3/4") |
| Max.karolo ea sesebelisoa sa ho itšeha | 25mm×25mm(1"×1") | 25mm×25mm(1"×1") |
| Kakaretso ea maeto a cross slide | 290mm(11 3/8") | 290mm(11 3/8") |
| Kakaretso ea maeto a li-slide tse holimo | 120mm(4 3/4") | 120mm(4 3/4") |
| Spindle bore | Φ82mm(3 1/4") | Φ82mm(3 1/4") |
| Nko ya spindle | D1-8 | D1-8 |
| Spindle morse taper nkong, ka letsohong | ME90/MT#5 | ME90/MT#5 |
| Nomoro ea lebelo la spindle | 12 | 12 |
| Mabelo a spindle a fapana | 25-2000 RPM | 25-2000 RPM |
| Lithako tsa meemphera | 4-112(50 NOS) | 4-112(50 NOS) |
| Litsela tsa metric | 0.25-7(24 NOS) | 0.25-7(24 NOS) |
| Libaka tsa Diametral DP / DP | 4-112(50 NOS) | 4-112(50 NOS) |
| Diametral pits MP/MP | 0.25-14(34 NOS) | 0.25-14(34 NOS) |
| Kakaretso ea maeto a tailstock quill | 120mm(4 3/4") | 120mm(4 3/4") |
| Mehatla stock quill | Φ60mm(2 3/8") | Φ60mm(2 3/8") |
| Lesela la taper tailstock | MT#4 | MT#4 |
| Spindle drive motor | 7.33HP(5.5KW) | 7.33HP(5.5KW) |
| Enjene ea pompo e pholileng | 4/75HP(0.04KW) | 4/75HP(0.04KW) |
| Boemo ba mochini | 88"×36"×49" | 110"×36"×49" |
| Boemo ba ho paka | 93"×39"×62" | 114"×39"×62" |
| NW | 1680kg | 2010kg |
| GW | 1930kg | 2260kg |
| NTHO NO. | 114045 | 114046 |
